| Example devices | Coil type |
|---|---|
| DRAG X, DRAG S, DRAG 2, DRAG 3, DRAG Max, selected VINCI and ARGUS devices | Original PnP coils |
| DRAG X2, DRAG S2, newer compatible devices | PnP X coils |
VOOPOO's current coil information lists the Voopoo Argus G3 Pod Kit, Voopoo Argus G2 Mini Vape Kit and other newer devices under the PnP X platform, while older devices use the original PnP system.
Are PnP and PnP X Coils Interchangeable?
No. You should not assume that a PnP X coil will fit an older PnP device. The same applies in reverse. An original PnP coil is not a suitable replacement for a device designed specifically for PnP X coils. If you are unsure, check the device manual, the coil packaging or the manufacturer's compatibility information before buying replacement coils.
Voopoo Argus G3 Pod Kit
Brand:Voopoo
Buy NowWhich Coils Does the VOOPOO DRAG X2 Kit Use?
The VOOPOO DRAG X2 kit uses the PnP X coil platform. The DRAG X2 is supplied with a PnP X cartridge and PnP X coils. VOOPOO lists PnP X resistance options ranging from 0.15Ω through 1.0Ω for the platform, although the exact cartridge and coil combination can vary by configuration. This means you should look specifically for VOOPOO PnP X coils when replacing the coil in a DRAG X2. Do not buy an original PnP VM coil simply because it has “PnP” in the name.
VOOPOO PnP X Coil Ohms Explained
The ohm rating tells you the electrical resistance of the coil. As a general rule, lower-resistance coils are designed to run at higher wattages and usually produce more vapour. Higher-resistance coils work at lower wattages and are generally more suitable for a tighter, lower-power vape.
For the PnP X range, VOOPOO currently lists these recommended wattage ranges:
| PnP X coil | Resistance | Recommended wattage | Vaping style |
|---|---|---|---|
| PnP X 0.15Ω | 0.15Ω | 60–80W | DTL |
| PnP X 0.2Ω | 0.2Ω | 40–60W | DTL |
| PnP X 0.3Ω | 0.3Ω | 32–40W | RDL/DTL |
| PnP X 0.45Ω | 0.45Ω | 25–32W | RDL |
| PnP X 0.6Ω | 0.6Ω | 18–23W | MTL/RDL |
| PnP X 0.8Ω | 0.8Ω | 12–16W | MTL |
| PnP X 1.0Ω | 1.0Ω | 10–13W | MTL |
These ranges are a starting point. Always follow the wattage printed on your specific coil and the manufacturer's instructions.
What Does Coil Resistance Mean?
Coil resistance affects how much power the coil needs. A 0.15Ω coil needs considerably more power than a 1.0Ω coil. It will normally produce more vapour and a warmer vape. A higher-resistance coil, such as 0.8Ω or 1.0Ω, operates at a much lower wattage and is generally better suited to MTL vaping. This is why choosing a coil based only on the number is not enough. You also need to consider your preferred draw, e-liquid and device.
What Wattage Should You Use With VOOPOO PnP Coils?
Use the recommended wattage range shown on the coil. For example, a PnP X 0.3Ω coil is rated at 32-40W, while the 0.8Ω version is rated at 12-16W. If your coil is rated at 32-40W, you can start towards the lower end and increase gradually if you want a warmer vape or more vapour.
Avoid going above the recommended range. Excessive wattage can overheat the coil, use e-liquid faster and shorten coil life. If the vape becomes too hot or the flavour starts tasting burnt, reduce the wattage and check the coil and e-liquid level.
Which PnP X Coil Is Best for MTL?
MTL means mouth-to-lung. You draw vapour into your mouth before inhaling it, giving you a tighter vaping style that is closer to the draw of a traditional cigarette. For this style, the higher-resistance PnP X coils are generally the more suitable options.
The PnP X 0.6Ω, 0.8Ω and 1.0Ω coils are designed for lower-power vaping, with VOOPOO listing the 0.6Ω for MTL/RDL and the 0.8Ω and 1.0Ω for MTL. If you prefer a tighter draw and less vapour, these coils are worth considering.
Which PnP X Coil Is Best for RDL?
RDL means restricted direct-to-lung. It sits between MTL and full DTL vaping. You get more airflow and vapour than with a traditional MTL setup, but the draw is still more restricted than a high-power DTL vape. The PnP X 0.3Ω and 0.45Ω coils are suitable options for RDL according to VOOPOO's current specifications. The 0.3Ω is rated at 32-40W, while the 0.45Ω is rated at 25-32W.
Which PnP X Coil Is Best for DTL?
DTL means direct-to-lung, where vapour is inhaled directly into the lungs. DTL vaping normally uses more power and produces more vapour than MTL. The lower-resistance PnP X coils are designed for this style. The 0.15Ω coil is rated at 60–80W, while the 0.2Ω coil is rated at 40-60W. If you prefer large vapour production and a warmer vape, these lower-resistance options may suit your style better.
What E-Liquid Should You Use With VOOPOO PnP X Coils?
The coil you choose should match the e-liquid you use. Higher-powered coils generally work better with e-liquids containing a higher VG content because they are designed to produce more vapour.
VOOPOO's current PnP X information recommends 50-70% VG for several PnP X setups, with the exact recommendation depending on the cartridge and coil. For lower-powered MTL coils, 50/50 e-liquid can be a better fit. Nicotine salt e-liquids are also commonly used with suitable higher-resistance MTL coils.
Always check the recommended e-liquid and nicotine level for your particular coil and device rather than assuming every PnP coil works with every e-liquid.
How to Prime a New VOOPOO PnP Coil
A new coil should be properly saturated before you start vaping.
After installing the coil:
- Fill the pod or tank with the correct e-liquid.
- Make sure the coil is properly fitted.
- Leave the filled pod to sit for around five minutes.
- Start at the lower end of the recommended wattage range.
- Increase the power gradually if needed.
VOOPOO specifically advises leaving the filled pod to sit for around five minutes before use on its DRAG S2 instructions.
Do not repeatedly fire a dry coil. The wick needs to be saturated with e-liquid before heating.
How Long Do VOOPOO PnP Coils Last?
There is no fixed number of days that every coil will last.
Coil lifespan depends on factors such as:
- How frequently you vape
- The wattage you use
- The type of e-liquid
- How sweet the e-liquid is
- How well the wick stays saturated
- How much e-liquid the device uses
VOOPOO states that PnP X coils can support up to 100ml of e-liquid under its testing conditions. However, the company also notes that real-world performance can vary depending on how the product is used.
So, treat 100ml as a manufacturer's test figure rather than a guarantee that every vaper will get exactly that amount from one coil.
How Do You Know When a VOOPOO Coil Needs Replacing?
Your coil may need replacing when you notice a clear change in performance.
Common signs include:
- Burnt or unpleasant taste
- Weaker flavour
- Reduced vapour production
- A dry or harsh hit
- Gurgling or unusual coil performance
- E-liquid tasting different from normal
If the pod has enough e-liquid but the flavour remains burnt after reducing the wattage, the coil may have reached the end of its usable life.
Replacing the coil is usually more effective than continuing to use one that is already worn out.
Why Is My VOOPOO Coil Leaking?
Small amounts of condensation around a pod do not always mean the coil is leaking. However, noticeable e-liquid inside the device or around the pod can indicate a problem.
Possible causes include:
- The coil is not fitted correctly
- The pod or coil seal is damaged
- The coil has been used for too long
- The pod has been overfilled
- E-liquid has entered the airflow area
Remove the pod and wipe away excess e-liquid before checking the coil and seals. If the problem continues, replace the affected coil or pod and follow the manufacturer's instructions.
Where to Buy VOOPOO PnP Coils in the UK?
If you are looking for VOOPOO PnP coils UK vapers can use with their compatible devices, check the coil platform and resistance before ordering. When choosing the best online vape shop in the UK, look for clear product information, proper coil specifications and compatibility details. A good product listing should make it easy to see the coil resistance, recommended wattage and supported devices. If you already know which replacement coil you need, you can buy vape coils online and compare the available options before ordering. Do not choose a coil simply because it says “VOOPOO PnP”. Check whether your device requires the original PnP platform or the newer PnP X system.
VOOPOO PnP Coils FAQs
Why does my VOOPOO PnP coil burn so quickly?
A VOOPOO PnP coil can burn quickly if you use it above its recommended wattage, vape heavily without letting the wick re-saturate, or use e-liquid that is high in sweeteners. Running the pod too low on e-liquid can also dry out the wick and damage the coil.
Why is my VOOPOO coil not producing much vapour?
Low vapour production can happen when the coil is reaching the end of its lifespan, the wattage is too low for that coil, or the battery is running low. Check the coil's recommended wattage and make sure the pod has enough e-liquid. If performance remains weak, fitting a new coil may solve the problem.
Why does my VOOPOO coil taste burnt after changing it?
A new coil can taste burnt if it has not absorbed enough e-liquid before use. Fill the pod and allow the coil to soak before vaping. It is also better to start at the lower end of the recommended wattage range rather than immediately using high power.
How can I make my VOOPOO PnP coil last longer?
Use the coil within its recommended wattage range, keep enough e-liquid in the pod and avoid taking repeated long puffs without giving the coil time to re-saturate. Choosing an e-liquid that suits the coil can also help maintain consistent performance.
Can I switch e-liquid without changing my VOOPOO coil?
You can, but the previous flavour may remain in the wick and affect the new e-liquid. This is more noticeable when switching between strong or very different flavours. If you want a clean flavour from the new e-liquid, using a fresh compatible coil is usually the better option.